Rough Country 3.5in Suspension Lift Kit with Control Arm Drop for 07-18 Jeep Wrangler JK

Shock Options: Select from Rough Country’s N3 shocks, V2 Shocks, or their Vertex Remote Reservoir shocks. Shock relocation brackets allow you to run your factory shocks with this lift. N3 shocks provide smooth performance with nitrogen-charged 10-stage variable valving. Vertex shocks feature 8-stage adjustability, and a nitrogen-charged monotube design. The remote reservoir increases fluid capacity, and reduces fade by dissipating heat. The Rough Country V2 shocks feature an aluminum body with a high-pressure monotube construction.

Control Arm Drop Brackets: By including Control Arm Drop Brackets with this kit, Rough Country optimizes driveline geometry and suspension travel. With a lower mounting point on the frame, the control arms are able to move in the factory arc.

Wrangler JK: The Rough Country 3.5in Suspension Lift Kit with Control Arm Drop was designed for use with two door Jeeps. The coil springs were specifically tuned for the Wrangler JK, and this kit is not compatible with four door models. If your Jeep is a 2012 or newer with a 3.6L engine, then you will need exhaust spacers to avoid interference with the front driveshaft.

Run Larger Wheels and Tires: The Rough Country 3.5in Suspension Lift Kit with Control Arm Drop allows you to fit 35x12.50 on your two door Jeep. You will also need between 4.5” and 4.75” of backspacing, so if you are using factory wheels, then you will need 1.5” wheel spacers.