Brok 2" Shank Ball Mount with Pin Stop

As low as $32.99

In stock

SKU

C-1033816

The bROK 2” Shank Ball Mount incorporates "pin stop" technology to enable one wrench to tighten bROK and hex shaped hitch balls. A 2-in drop from the top of your receiver aids in leveling your trailer while towing. Constructed with welded steel and a black powder coat finish for years of service. The 2-in shank accommodates all class III-IV receivers, a 5/8-in hole for receiver pin or lock and a 1-in hole for the hitch ball Shank.

2" Drop Specifications:

Length - 12.5"
Height - 2.5"
Width - 3"
Class - III / IV
Receiver Opening - 2"
Capacity GTW - 6000lbs.
Capacity TW - 600lbs.
Drop - 2"
Rise - 0.75"
Ball Hole Diameter - 1"
Pin Hole Diameter - 0.62"
One Wrench to Tighten - Yes

3" Drop Specifications:

Length - 13.5"
Height - 2.5"
Width - 4.25"
Class - III / IV
Receiver Opening - 2"
Capacity GTW - 5000lbs.
Capacity TW - 500lbs.
Drop - 3"
Rise - 1.75"
Ball Hole Diameter - 1"
Pin Hole Diameter - 0.62"
One Wrench to Tighten - Yes

5" Drop Specifications:

Length - 15"
Height - 2.5"
Width - 6.5"
Class - III / IV
Receiver Opening - 2"
Capacity GTW - 5000lbs.
Capacity TW - 500lbs.
Drop - 5"
Rise - 3.75"
Ball Hole Diameter - 1"
Pin Hole Diameter - 0.62"
One Wrench to Tighten - Yes

8" Drop Specifications:

Length - 13.5"
Height - 2.5"
Width - 9.5"
Class - III / IV
Receiver Opening - 2"
Capacity GTW - 5000lbs.
Capacity TW - 500lbs.
Drop - 8"
Rise - 6.75"
Ball Hole Diameter - 1"
Pin Hole Diameter - 0.62"
One Wrench to Tighten - Yes