OCULUS LED HEADLGHT SWITCHBACK JK TJ CJ

Dapper, astonishingly bright, DOT & SAE compliant Oculus Bi-LED Projector Headlights for your 55-86 Jeep CJ, 97-18 Wrangler TJ, JK, & Vehicles with 7" Round Headlights are here! On the outside, these LED headlights look like a sweet custom retrofit that is sure to attract looks of wonder & envy from your fellow Jeepers and car aficionados alike. Projecting 3200 lumens low, 4800 lumens high, in a 5500K color temp these lights will absolutely demolish the night to show you what lies ahead on the road and trail. When aimed properly after installation, the projector lens provides an ultra-bright output that does not blind oncoming traffic due to the sharp cutoff. These headlights have a low draw of 36-watts which is a lower power demand than your factory headlights and they provide a much brighter light output. Utilizing both active and passive cooling methods (Remote mounted heat sinks and internal cooling fan) keeps the LED operating temps low which extends their life. Halo-ring features 200 bright LEDs to help you be seen during the day. Multiple halo options are available and listed below. Simple bolt-on installation uses the factory mounting hardware. Headlight wiring is Plug & Play into the factory connector without additional relays or harnesses. For CJ, TJ, and other vehicles utilizing an H4-style plug you will need an H13 to H4 adapter pair - sold separately. Wiring of the halo-ring requires just a ground and add-a-fuse which is included in this kit. Will work with classic cars and other vehicles that have factory 7-inch round lights as long as an H4 adapter is utilized, though some modifications may be required depending on the application.

Available models include: White halo with bezel color options; White halo with amber switchback turn signal; ColorSHIFT without controller; ColorSHIFT with a simple remote; ColorSHIFT with a Key Fob remote; ColorSHIFT 2.0; ColorSHIFT WiFi; ColorSHIFT BC1. ColorSHIFT models allow control over the outer halo ring, inner halo ring, and projector backlighting! Each one of those features utilizes a separate output cable. These cables can be connected either together (All 3 produce the same color) or on separate Channels - depending on your preference and the ColorSHIFT model you purchase. To have different colors for each zone (Outer halo, inner halo, projector backlight), you need to purchase the ColorSHIFT 2.0 model or purchase the BC1 or WiFi with 2 additional controller units (sold separately).

ColorSHIFT BC1 is Bluetooth and uses your phone & a free app to control the lighting. To have different colors for each zone (Outer halo, inner halo, projector backlight), you need to purchase the ColorSHIFT 2.0 or purchase the BC1 or WiFi with 2 additional controller units (sold separately).

ColorSHIFT 2.0 uses an infrared remote to control the lighting. This setup allows you to have different colors for each zone (Outer halo, inner halo, projector backlight).

ColorSHIFT WiFi uses your phone & a free app to control the lighting. To have different colors for each zone (Outer halo, inner halo, projector backlight), you need to purchase the ColorSHIFT 2.0 or purchase the BC1 or WiFi with 2 additional controller units (sold separately).

Please note that these ColorSHIFT features are intended for off-road “show” use only and are not compliant for street use. Most states require forward-facing lighting to be white or amber when on public roads.