AUTORUST TJ RR TRACKBAR/CONTROL ARM MNT

The Auto Rust Technicians Rear Axle Track Bar and Trailing Arm Bracket was designed to fit a Jeep Wrangler TJ with a 2.75" diameter axle, but will work on larger diameter axles. This is to be used as an OEM replacement for the track bar and upper control arm bracket that is mounted on the rear axle, it is not designed to be used on modified or lifted suspensions. Manufactured right here in the USA, this thick 7 gauge Hot Rolled Pickled and Oiled (HRPO) steel is CNC cut, bent, and MIG welded by Auto Rust Technicians' own professionals. To help make installation easier, the nuts are welded for a hex cap screw to be bolted to both the trailing arm and track bar. Once the old bracket is removed and the surface is prepared, this bracket is to welded directly to the axle. During installation, the sway bar bracket remains in place and is straddled by this trailing arm bracket.