STEALTH-POD KICKER SUB AMP 76-15 CJ/WRN

The Stealth-Pod™ is a portable subwoofer enclosure designed to fit all CJ7, CJ8, ’87-’95 YJ, ’97-’06 TJ, and all ’07-‘16 JK Wranglers. Special hangers suspend the Stealth-Pod™ slightly off the tailgate and rubber pads isolate the pod, thwarting any vibration. The Stealth-Pod™ swings with your tailgate, leaving the tailgate fully functional. The pod is easily removed: just open the tailgate, pull the wire plug, and lift the pod of the hangers using the handle. The rest of your audio system will continue to work as it always did and your amplifier simply sits idle until you plug the pod in again. Worried someone may steal it or live in a not-so-safe area? Take it with you! The Stealth-Pod’s smaller size leaves much of your cargo space intact and the portability is great when you need all the cargo space! The Stealth-Pod™ hides a 10” subwoofer from view and produces truly remarkable sound -the subwoofer fires downward on an angle, maximizing bass output. This position also protects the subwoofer from cargo and from the elements. Talk about versatility…there’s even little rubber feet included to attach to the base of the pod so you can take it indoors, put it on the floor, and use it in your home stereo system!

The Stealth-Pod™ is a .70 cu/ft. sealed enclosure made of very strong, no-flex ¼” textured plastic that houses just about any 10” subwoofer, even accepting subwoofers with very large magnets. Installation hardware and detailed instructions included with every Stealth-Pod™.

The Stealth-Pod™ is available empty so you can add your own audio components, and is also offered loaded with:

• Kicker® Mono Amplifier rated at 150 watts rms @ 4-ohms.
• Kicker® 10” Subwoofer (4-ohm) rated at 300 watts rms.
• Kicker® Remote Bass Level Controller.
• 8-gauge amplifier wiring kit with all the necessities.
  
  

Installation is quick and easy with instructions for all Jeep models. It’s a matter of drilling some very small holes in specific places on the tailgate to mount the hangers and the correct drill bit for the job is included. You can download the instructions here on our site to view some helpful images and learn more about the install.

You can also purchase the pod empty and add your own audio components. Installation hardware and detailed instructions with photos are included with every Stealth-Pod.